Brick Mesh

Brick Mesh is the perfect mesh for bonding and strengthening brick and concreting work, it provides a rigid and strong hold.
Brick Reinforcement Mesh has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.
Brick Wall Reinforced Mesh is very ideal construction material during building.and it is in small coil, so it is also named as brick coil mesh.

Material: galvanized iron wire ,black iron wire

Surface Treatment: Black Annealed

Packaging: Each roll with shrink film, then packing in pallet

Features: The welding spots of warp wire and weft wire are on the same surface.

(1)Greatly reduces cracking that can arise from thermal stresses.

(2)This enhances resistance to water penetration, as cracks are controlled.

(3)Increases elasticity and performance of masonry walls under various stresses

Usually galvanized low carbon steel wire welding or high quality low carbon steel wire welding, and then galvanized. The welded brick mesh is divided into trapezoid and triangle, and two wires and three wires are welded. It is characterized by that all the wires are in the same plane.

The brick mesh also called black brick mesh, building brick mesh, ladder brick mesh, brick coil mesh, welded brick coil mesh, brick wall reinforcing mesh, masonry ladder brick mesh.The Brick Force Mesh Is widely used in the building construction area, normally used in the wall for reinforcement. 

Welded Wire Mesh Panel for Reinforced Concrete Construction.Welded Mesh for Light Concrete Construction.Mainly used in building surface, wall, ground, bridge, bank and airport.